Skip to Content

Home Academics Programs and Majors Diesel/Clean Diesel Technology

Diesel/Clean Diesel Technology

Overview Degrees/Certificates Courses Faculty

Diesel/Clean Diesel Technology (DCDT) Courses

DCDT 100 Diesel Technology Basics

  • Units:4
  • Hours:72 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course introduces diesel technology. Topics include shop safety, hazardous waste handling and disposal, and engine components and their function.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • apply safety and environmental regulations and standards required in the diesel repair environment.
  • describe the operation of a four stroke diesel engine.
  • explain the principles of interpersonal skills as required in the workplace.
  • utilize technician reference manuals.

DCDT 101 Diesel Preventive Maintenance

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course presents theoretical and practical training for entry-level diesel technicians. It covers the basic diesel diagnosis and service procedures used in diesel shops. Projects performed in a diesel shop environment provide hands-on experience with industry shop tools. Topics include shop service operations that meet the diesel industry standards, safety, electrical, and other general diesel procedures.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • identify and demonstrate the proper use of hand and power tools used in diesel repair.
  • utilize correct safety procedures for both hand and power tools used in diesel repair facilities.
  • identify and properly utilize shop equipment and chemicals used in the diesel repair environment.
  • apply the primary state and federal regulations, including Occupational Safety and Health Association (OSHA) and the Environmental Protection Agency (EPA).
  • demonstrate proper use of hydraulic and mechanical jacks and hoists.

DCDT 102 Biodiesel Fuel and Fuel Systems

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the chemistry, production, and impact of biodiesel technology. It also covers how to convert vehicle fuel systems to biodiesel and how this process affects warranties.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • list the requirements for converting fossil fuel vehicles to biodiesel vehicles.
  • describe the process for making biodiesel.
  • compare fossil fuel to straight vegetable oil, waste vegetable oil, and biodiesel.

DCDT 103 Clean Diesel Systems

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course provides a complete overview of the clean diesel engine system. Topics include fuel injection systems and diesel electronic control systems.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • identify the basic principles of the modern diesel engine.
  • explain basic diesel engine fundamentals.
  • identify diesel fuel injection systems.
  • perform a visual inspection of diesel engines.
  • explain basic troubleshooting of diesel electronic control systems.

DCDT 104 Clean Diesel Rebuild, Retrofit, Repower, Retire

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers clean diesel rebuilding, repowering, retrofitting, and retiring of equipment decisions. Topics include inspection, rebuilding, replacement, and retirement of diesel systems and components.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain how to decide whether to rebuild or replace diesel systems or components.
  • demonstrate the necessary skills to repair engine components.
  • identify the engine components that need replacement.
  • identify reasons for the retirement of engine components.

DCDT 107 Hybrid Diesel Power Trains

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers diesel hybrid powertrains found in current hybrid technology. Topics include basic diesel hybrid powertrains, hybrid power modes, and power electronic carriers.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • apply high voltage safety procedures to diagnosis and repair of diesel hybrid vehicles.
  • explain the power flow found in diesel hybrid powered vehicles.
  • perform high voltage service shutdown procedures according to manufacturer manuals.
  • inspect and diagnose diesel hybrid powertrains.

DCDT 108 Hybrid Diesel High Voltage Systems

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers high voltage power systems on diesel hybrid powered vehicles. Topics include high voltage main component identification and inspection, inspection of high voltage cables, testing, re-use, and end-of-service decisions.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • diagnose and repair diesel hybrid vehicles.
  • explain high voltage flow of diesel hybrid powered vehicles.
  • use electrical diagnostic tools to isolate malfunctions.
  • diagnose, repair, and replace high voltage cables, connectors, and components.

DCDT 109 Hybrid Diesel Component Application

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers testing and replacement of diesel hybrid components. Topics include electronic shifting theory and diesel hybrid component application.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the application and proper troubleshooting of diesel hybrid mounted components.
  • explain hybrid theory power up found in the Eaton system.
  • diagnose and repair or replace multiple relays, Push Button Controller, Hybrid Control module, and Transmission Electronic Control Unit.

DCDT 110 Diesel Engine Repair

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the principles, operation, and diagnosis of diesel engines. Topics include basic engine operation and construction, parts identification and location, engine disassembly procedures, engine diagnosis, engine repair and rebuilding procedures, and engine reassembly procedures.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • diagnose and troubleshoot internal engine component malfunctions.
  • analyze engine components for wear and/or tear.
  • evaluate repairs by inspecting engine components with precise measurement tools such as gauges and micrometers.
  • remove and replace engine components such as covers, gaskets and seals.

DCDT 111 Clean Natural Gas Engine Repair

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course introduces clean natural gas engine repair. Topics include engine application and principles of engine operation, disassembly and reassembly of engine components and systems, and various engine systems as they relate to clean natural gas engines.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain clean natural gas diesel engine theory.
  • identify various clean natural gas diesel engine applications.
  • apply proper techniques for cleaning and removal of clean natural gas diesel engines.

DCDT 112 Clean Diesel Retrofit

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the diesel engine retrofit needs for older diesel engines. Topics include troubleshooting, fault codes, welding, and diesel particulate filter systems.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • show how to install the selective catalytic reduction filters as part of retrofitting.
  • identify diesel particulate filters in need of replacement or retrofit.
  • describe current retrofit technologies in the diesel industry.
  • demonstrate correct welding techniques for diesel application.

DCDT 113 Diesel Hybrid Motor Generators

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers diesel hybrid motor/generators found in current hybrid technologies. Topics include basic diesel hybrid motor/generators, hybrid power modes, and power electronic components.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • utilize safety precautions that apply to diagnose and repair electrical/electronic components.
  • explain electronic control of multiple systems found in current diesel motors/generators.
  • use electronic tools found in the current diesel industry and utilize flowcharts to locate the malfunctions.
  • diagnose and repair or replace multiple sensors and high voltage wiring harnesses found in full authority systems.

DCDT 120 Basic Hydraulic Principles of Diesel Technology

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course introduces basic hydraulic principles and functions of the diesel engine. Topics include hydraulic fundamentals and principles, functions of hydraulic fluids, directional and flow control valves, welding, and machine hydraulic overview.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • use and apply proper safety procedures for basic hydraulic systems, including proper lifting and blocking methods.
  • demonstrate the proper use of both power and hand tools used in the diesel repair environment.
  • explain the function of the primary hydraulic system.
  • explain the operation of the components of the primary hydraulic system.
  • identify hydraulic symbols.
  • use precise measuring tools for hydraulic repair.
  • explain the operation of hydraulic cylinders.
  • demonstrate correct welding techniques for diesel application.

DCDT 130 Diesel Brake Systems

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the theory, design, adjustment, and repair or overhaul of diesel brake systems and components. Topics include the proper operation of power and hand devices used in the servicing of diesel brake systems and components.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • practice safety precautions and procedures when inspecting and repairing diesel braking systems.
  • analyze the various brake components used on heavy equipment diesel trucks and describe the functions of each.
  • evaluate and diagnose diesel brake components/system malfunctions.
  • identify the specialized tools necessary to diagnose and repair diesel brake component/system malfunctions properly.
  • practice using the special tools in diagnosing and repairing diesel brake system malfunctions.
  • arrange, clean, inspect, and measure all components of diesel brake systems following established service manual procedures.
  • demonstrate the refinishing of the diesel brake rotors and drums following established service manual procedures.
  • exhibit the reassembly and adjust all components of the diesel brake system following service manual procedures.

DCDT 131 Diesel Suspensions

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course is an introduction to advanced principles and service of diesel suspension and steering systems. Topics include alignment of equipment, alignment procedures, and the diagnosis and repair of diesel suspension components.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • analyze, describe, and practice safe working conditions while observing safety regulations in a diesel repair facility.
  • use measuring instruments and procedures proficiently.
  • identify diesel service tools and equipment.
  • identify the various components used on diesel suspension systems and describe the function of each.
  • diagnose any malfunction of the suspension components used on heavy-duty diesel trucks.
  • analyze tire wear problems and vibrations and perform the necessary repairs.
  • demonstrate the disassembly, inspection, cleaning, and reassembly of all components of the steering and suspension systems in accordance with service manual procedures.
  • analyze alignment angles to determine the need for alignment.
  • assess the need for and perform alignments.
  • exhibit geometric center-line and thrust-line alignments.
  • utilize tire balancing procedures.

DCDT 140 Diesel Electrical Systems

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the principles, operation, and diagnosis of diesel electrical systems. Topics include fundamentals of electricity, electrical circuits, battery operation, fundamentals of magnetism, charging systems, starting systems, and electrical schematics.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • identify and avoid unsafe conditions and unsafe acts in compliance with safety laws and regulations in the diesel workplace.
  • calculate electrical mathematical problems with Ohm's Law, fractions, square roots, and power formulas.
  • solve fundamental problems as they apply to electrical system repair.
  • analyze electrical components for malfunction.
  • identify and interpret basic electrical schematics for system diagnosis and repair.
  • evaluate repairs by utilizing test equipment such as a digital volt ohm meter (DVOM) and a voltage amperage tester (VAT-40).
  • diagnose and repair simple electrical systems based on the diesel industry performance standard levels.

DCDT 142 Diesel Emission Control Systems

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the emission control system of the diesel engine. Topics include performing maintenance and emissions control within the emission limits.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • identify potential and known health effects of diesel engine emissions.
  • diagnose and correct causes of emission system control failure.
  • demonstrate visual inspection of emission control systems failure.
  • inspect and repair emission system control failure.

DCDT 150 Diesel Power Trains

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the diesel power train. Topics include inspection and adjustment of clutch linkage, flywheel, and replacement of clutch brakes.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • identify power train components and their functions.
  • diagnose causes of drive train failure.
  • inspect drive train.
  • diagnose clutch problems.
  • inspect and repair hydraulic clutch slave and master cylinders.
  • inspect release fork, fork shaft, and bushings.

DCDT 162 Clean Diesel Software Support

  • Units:4
  • Hours:72 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the skills needed to adequately retrieve and apply system information using Internet-based technical manuals specifically geared toward diesel tractor emission control systems.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • locate, analyze, and download information specific to diesel tractor manufacturers.
  • apply retrieved data to diesel tractor conditions.
  • communicate technical information to technicians as retrieved from the Mitchell1 www.tractor-trailer.net.
  • apply procedural information, illustrations, diagnostic information, and wiring diagrams to diesel tractors.

DCDT 163 Industrial Software and Systems

  • Units:4
  • Hours:72 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the skills needed to adequately retrieve and apply Cummins INSITE and Eaton diesel engine information using Internet-based technical manuals specifically geared toward diesel tractor emission control systems.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • locate, download, and print information specific to Cummins INSITE and diesel engines.
  • apply retrieved data to Cummins INSITE and diesel engine conditions.
  • communicate technical information to technicians as retrieved from Cummins INSITE and aftermarket diesel software.
  • apply procedural information, illustrations, diagnostic information, and wiring diagrams to Cummins INSITE and diesel engines.

DCDT 180 Industrial Fabrication I

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers the various processes of welding in transportation and industrial repairs using metal inert gas (MIG) and tungsten inert gas (TIG). Topics include proper safety procedures pertaining to the fabrication of metallic and nonmetallic materials, metallic and nonmetallic fabrication techniques, and various metals and plastics used in fabrication.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • list the types of protective clothing that should be worn in a fabrication shop.
  • demonstrate safety precautions while aluminum welding with metal inert gas (MIG) and tungsten inert gas (TIG).
  • explain welding equipment components and accessories.
  • identify and explain how to sheet .120 steel welding with metal inert gas (MIG) and tungsten inert gas (TIG) on standard, high strength steel (HSS), advanced high strength steel (AHSS), and ultra high strength steel (UHSS), and boron steel.

DCDT 181 Industrial Fabrication II

  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers fabrication which involves cutting, altering, and shaping steel or other materials through the use of different tools, techniques, and processes. Topics include hot-gas and airless fabrication techniques, vehicle frames in relation to fabrication, tack welding, and filler material.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain how the chassis frame, side rails, and cross-members can be repaired.
  • outline basic frame fabrication techniques.
  • explain the difference between pipe used for piping systems versus pipe used for structural applications.
  • show how to cut and form 18 gauge to 3/8" steel and aluminum.
  • demonstrate how to weld similar and dissimilar metal thicknesses to specification.

DCDT 190 Applied Projects in Clean Diesel Technology

  • Units:2
  • Hours:108 hours LAB
  • Prerequisite:DCDT 101, 110, 120, 130, 140, or 150 with a grade of "C" or better
  • Catalog Date:August 1, 2024

This course provides opportunities to pursue advanced laboratory projects in all eight of the Automotive Service Excellence (ASE) for the Medium/Heavy-Duty Technician educational areas. Projects are selected by the Diesel Department.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • analyze performance issues in complex clean diesel technology systems.
  • apply clean diesel technology system specifications and tolerances to diesel projects.
  • demonstrate skills in fabrication and repair techniques.
  • construct a complete clean diesel technology project.
  • research clean diesel technology information and specifications using printed and Internet sources.

DCDT 191 Speed and Skill Development

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course covers diesel component diagnosis and repair, including electrical, hydraulics, engine, fabrication, and other areas in preparation for competing in the state fair. This course may be taken up to four times for credit.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • interpret customer's complaints, evaluate vehicle condition, and diagnose proper repair procedures in a competitive environment.
  • analyze and replace engine cooling and heater system hoses in a competitive environment.
  • diagnose electrical system tests and determine necessary action in a competitive environment.
  • demonstrate correct welding techniques for diesel fabrication application in a competitive environment.
  • solve an engine code problem and correct condition in a competitive environment.
  • explain the requirements for the state fair competition.

DCDT 200 Light Duty Diesel/Green Diesel Technology

  • Same As:AT 156
  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course introduces the diagnosis and repair of light duty diesel vehicles and covers the theory and operation of light duty diesel engines and their fuel delivery systems. Topics include diesel engine characteristics, early mechanical fuel delivery systems, early cylinder head design, and early engine construction. It also covers how to prepare these engines for conversion to green technology, such as low sulfur fuel, biodiesel, and alternative fuels. This course along with DCDT 201 is applicable for the field technician seeking training for Automotive Service Excellence (ASE) A9 certification and preparation for green technologies.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • describe the basic operation of diesel fueled vehicles.
  • explain the differences between diesel and gasoline engine design.
  • diagnose basic diesel engine driveability problems.
  • perform basic diesel engine mechanical diagnostic procedures.
  • evaluate the diesel fuel injection system's compatibility with low sulfur and biodiesel fuels.

DCDT 201 Advanced Light Duty Diesel/Green Diesel Technology

  • Same As:AT 157
  • Units:4
  • Hours:54 hours LEC; 54 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course focuses on late model turbocharged light duty diesel vehicles operating on low sulfur, biodiesel, or alternative fuels. Topics include computer controlled injection, emission control systems, sensors, actuators, computer modules, exhaust gas recirculation (EGR) systems, particulate traps, selective catalytic reduction (SCR) systems, and lean oxides of nitrogen (NOx) traps. It covers diagnosis and repair of these systems using computer diagnostic equipment to meet state emission compliance. This course along with DCDT 200 is applicable for the field technician seeking training for Automotive Service Excellence (ASE) A9 certification and preparation for green technologies.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the operation of common rail diesel fuel injection systems.
  • explain the differences between late model diesel and older diesel engine design.
  • diagnose basic driveability problems on late model diesel vehicles.
  • perform basic diesel engine turbocharger diagnostic procedures.
  • evaluate high pressure fuel system compatibility with biofuels and biofuel impact on diesel emissions.
  • test diesel engine emissions and emission control systems.

DCDT 280 Professionalism in the Industry

  • Units:3
  • Hours:45 hours LEC; 27 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course introduces students to the professionalism and soft skills in the heavy duty clean diesel workplace. It provides an in-depth review of skills needed, ranging from applying for jobs, interviewing by panel, professional behavior, proper diesel technology phrases used in the workplace, how to communicate professionally with clients and other employees, and many other topics for the professional diesel technician work etiquette.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • create a professional and concise resume for the clean diesel industry.
  • demonstrate interviewing skills within the diesel repair industry.
  • describe basic customer service skills as a clean diesel technician.
  • discuss examples of appropriate clean diesel technology etiquette in the workplace.

DCDT 281 Diesel Shop Operations

  • Units:4
  • Hours:72 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course introduces operations of dealerships, independent shops, and fleet shops. It emphasizes the various influences that affect the technician's position with the various operations. Topics include service, sales, parts, and financial operations. Customer Satisfaction Index (CSI) is also discussed. Field trips to local shops may be required.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • identify all of the dealership's departments and their functions.
  • critique dealership, independent, and fleet shop operations.
  • analyze and evaluate the advantages and disadvantages of working in dealerships, independent shops, and fleet shops.

DCDT 298 Work Experience in Clean Diesel Technology

  • Units:0.5 - 4
  • Hours:27 - 216 hours LAB
  • Prerequisite:None.
  • Enrollment Limitation:Students must be in a paid or unpaid internship, volunteer position, or job related to the clean diesel technology field with a cooperating site supervisor. Students are advised to consult with the Diesel Department faculty to review specific certificate and degree work experience requirements.
  • Advisory:Eligible for ENGWR 300 or ESLW 340.
  • General Education:AA/AS Area III(b)
  • Catalog Date:August 1, 2024

This course provides students with opportunities to develop marketable skills in preparation for employment or advancement within the clean diesel technology field. It is designed for students interested in work experience and/or internships in associate degree level or certificate occupational programs. Course content includes understanding the application of education to the workforce, completion of Title 5 required forms which document the student's progress and hours spent at an approved work site, and developing workplace skills and competencies.

During the semester, the student is required to complete 27 hours of related work experience for 0.5 unit. An additional 27 hours of related work experience is required for each additional 0.5 units. All students are required to attend the first course meeting, a mid-semester meeting, and a final meeting. Additionally, students who have not already successfully completed a Work Experience course will be required to attend weekly orientations while returning participants may meet individually with the instructor as needed. Students may take up to 16 units total across all Work Experience course offerings. This course may be taken up to four times when there are new or expanded learning objectives. Only one Work Experience course may be taken per semester.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • demonstrate mastery of specific job skills in the clean diesel technology field related to an associate degree or certificate occupational program level career as written in the minimum three (3) learning objectives created by the student and their employer or work site supervisor at the start of the course.
  • make effective decisions, use workforce information, and manage their personal career plans.
  • behave professionally, ethically, and legally during work, consistent with applicable laws, regulations, and organizational norms.
  • behave responsibly during work, exhibiting initiative and self-management in situations where it is needed.
  • apply effective leadership styles during work, with consideration to group dynamics, team and individual decision making, and workforce diversity.
  • communicate in oral, written, and other formats, as needed, in a variety of contexts during work.
  • locate, organize, evaluate, and reference information during work.
  • demonstrate originality and inventiveness during work by combining ideas or information in new ways, making connections between seemingly unrelated ideas, and reshaping goals in ways that reveal new possibilities using critical and creative thinking skills such as logical reasoning, analytical thinking, and problem-solving.

DCDT 299 Experimental Offering in Diesel/Clean Diesel Technology

  • Units:0.5 - 4
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This is the experimental courses description.


DCDT 1000 ASE Diesel Engines (T2)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Diesel Engines T2 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • understand how the ASE exam is scored.
  • discuss general engine diagnostics, including cylinder head, valve train, and engine block diagnosis and repair.
  • summarize the diagnosis and repair of lubrication, cooling, air induction, exhaust, and fuel systems.
  • explain starting and charging systems diagnosis and repair.

DCDT 1001 ASE Drive Train (T3)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Drive Train T3 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • understand how the ASE exam is scored.
  • explain clutch and transmission diagnosis and repair.
  • summarize drive shaft, universal joint, and drive axle diagnosis and repair.

DCDT 1002 ASE Brakes (T4)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Brakes T4 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • describe how the ASE exam is scored.
  • summarize air brake diagnosis and repair.
  • discuss air supply and service systems.
  • discuss the mechanical foundation, wheel hub, and parking brakes.
  • illustrate hydraulic brakes diagnosis and repair.
  • describe Air and Hydraulic Antilock Brakes Systems (ABS), Automatic Traction Control (ATC), and Electronic Stability Control Systems.

DCDT 1003 ASE Suspension & Steering (T5)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Suspension and Steering T5 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • summarize how the ASE exam is scored.
  • discuss steering system, suspension, frame, and 5th wheel diagnosis and repair.
  • describe wheel alignment diagnosis, adjustment, and repair.

DCDT 1004 ASE Electrical/Electronic Systems (T6)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Electrical/Electronic Systems T6 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • understand how the ASE exam is scored.
  • summarize general electrical/electronic system diagnosis, and battery and starting system diagnosis and repair.
  • explain lighting and vehicle systems diagnosis and repair.

DCDT 1005 ASE Industrial Refrigeration Systems (T7)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Industrial Refrigeration Systems T7 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • summarize how the ASE exam is scored.
  • discuss HVAC systems and a/c system and component diagnosis, service, and repair.
  • discuss heating and engine cooling systems, operating systems, and related controls diagnosis and repair.

DCDT 1006 ASE Preventive Maintenance Inspection (T8)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Preventive Maintenance T8 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • summarize how the ASE exam is scored.
  • discuss engine systems, cab, and hood.
  • explain automotive electrical/electronics and frame and chassis, including brakes, drivetrain, steering, tires, wheels, suspension, frame, and 5th wheel.
  • describe the road/operational test.

DCDT 1007 ASE Light Vehicle Diesel Engines (A9)

  • Units:0.25
  • Hours:4.5 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2024

This course prepares the Medium/Heavy Duty Truck Technician for taking the Automotive Service Excellence (ASE) Exam for the Light Vehicle Diesel Engine A9 certification test.

Student Learning Outcomes

Upon completion of this course, the student will be able to:

  • explain the ASE certificate exam requirements.
  • utilize ASE test taking strategies.
  • summarize how the ASE exam is scored.
  • discuss general diagnostics, cylinder head and valve train diagnosis and repair, and engine block diagnosis and repair.
  • describe lubrication and cooling systems diagnosis and repair, air induction and exhaust systems diagnosis and repair, and fuel systems diagnosis and repair.